How to Repair PVC Pipe in Tight Spaces [7 Steps to Follow]
Have you got your PVC pipe damaged and wondering How to repair PVC pipe in tight spaces? Here we have explained it in 7 steps to repair PVC pipes in tight spaces:
- Stop the flow of water.
- Make a drip pan or bucket.
- Fix the leakage
- the pipe connection should be sealed
- Ensure that any loose fittings are tightened.
- Repair the pipe that has been damaged.
- Re-start the water and check it.
1. Stop the Flow of Water
Make sure the water is shut off in the area where you’ll be working on the pipe. Turn the valve a quarter turn to the right until the water turns off.
2. Make a Drip Pan or Bucket
Place a small basin beneath the leak spot if space allows avoiding spilling of water around. If you’re working in a tight space, wear knee protectors to stay protected from harm.
3. Fix the Leakage
Use your degreaser and cleaning cloth or a house cleaner to clean the region of the pipe that leaks. Make sure to wipe the sealant off thoroughly after application to ensure proper adhesion. Allow the area to dry for a few minutes. Once the epoxy has dried, remove it and mix it according to the manufacturer’s instructions. After that, add epoxy glue to the damaged area and allow it to cure for 10 to 15 minutes
4. The Pipe Connection should be Sealed
Pipe connections are mostly the areas from where the leakage is seen. You’ll have to replace the fitting if it’s twisted or damaged. Remove the fitting connection and apply epoxy to the cracked region if the pipe has a crack at the fitting. Before applying the sealant, make sure it is clean and that it has had time to dry.
5. Ensure that any Loose Fittings are Tightened
If the water is coming from a loose connection, tighten the connection with your wrench or screwdriver. Tighten the male fitting first by twisting it to the right, then tighten the female fitting. To protect the fitting from shifting, make sure to grasp it tightly. Next, as much as possible, tighten the female fitting to the right. Examine the connection for any sort of leaking once you’ve fastened the fitting.
6. Repair the Pipe that has been Damaged
If a PVC pipe is damaged beyond repair, it will need to be replaced. Since you’re working with limited space, you’ll need to use the smallest saw to cut the pipe away from the fitting. Start by loosening the pipe at the connector. Then grab your cutting tool; a small oscillating saw is the best tool for this job. Be sure to use no more than a 2.5-inch to the 3-inch attachment for the saw, or you may find yourself struggling to access the pipe.
7. Re-start the Water and Check it
Finally, turn the water back on and inspect the pipe while running the water to ensure that the leak is gone.
This is all about how to repair PVC pipe in tight spaces. For more information, visit our site