Residential Plumbing Portland, Restaurant Plumbing Services Portland OR

Restaurant & Bar Plumbing Services in Portland, OR
Professional plumbing services for restaurants, bars, and commercial kitchens.
Grease traps, floor sinks, bar sinks, and code-compliant installations.
Get FREE Estimate

Restaurant & Bar Plumbing Specialists in Portland

We provide professional plumbing services for restaurants, bars, and commercial kitchens throughout Portland, OR.

Our team understands the demands of commercial environments and delivers reliable, code-compliant, and inspection-ready plumbing systems designed to keep your business running smoothly.

From new restaurant build-outs to upgrades and repairs, we handle all aspects of commercial kitchen plumbing with precision and efficiency.

We specialize in:

Grease trap installation (indoor and outdoor)
Floor sinks and floor drain systems
Bar sinks and handwash stations (ADA compliant)
Commercial dishwasher connections
Water, waste, and vent systems
Plumbing for tenant improvements (TI) projects

We work closely with restaurant owners, general contractors, and project managers to ensure every installation meets Oregon Plumbing Specialty Code and health department requirements.

BOOK AN APPOINTMENT

DO YOU NEED RESTAURANT PLUMBING SERVICES?

Opening a new restaurant or bar?
We provide complete plumbing installation for commercial kitchens and bar setups.

Need a grease trap installed or replaced?
We install indoor and outdoor grease interceptors per code and health department requirements.

Need floor sinks or floor drains?
We install proper drainage systems with air gaps to meet commercial kitchen standards.

Setting up a commercial dishwasher or bar sink?
We handle all water, waste, and vent connections for a reliable and compliant system.

Having issues passing inspection?
We correct plumbing issues to meet Oregon Plumbing Specialty Code and get your project approved.

Need Plumbing Layouts for Permits?

In some commercial projects, plumbing plans are required to obtain city permits.

If your project does not include plumbing drawings, JAM Plumbing PDX can assist in creating a basic plumbing layoutfor submission to the city.

We can help ensure your project meets local requirements before installation begins, helping avoid delays during the permit and inspection process.

In many cases, plans are provided by an architect or engineer. However, when they are not available, we can work with you to develop a layout based on your project needs.

Get an Estimate

Plumbing for Restaurants and Bars — Built to Pass Inspection

Planning and layout are critical in any restaurant or bar plumbing project, especially when it comes to passing inspection and avoiding costly mistakes.

In many cases, having engineered plumbing plans is required for permit approval. However, beyond the plans, real-world conditions inside the building must be carefully evaluated before starting the work.

One of the most important factors is verifying that there is enough elevation to properly install a grease trap inside the building. If the elevation does not allow proper drainage, the system will not function correctly and may fail inspection.

It is also essential to correctly separate grease waste lines from the main sewer system. Grease lines must be routed properly and cannot be mixed with waste lines from toilets or other sanitary fixtures. Improper layout can lead to serious issues, including backups, contamination, and code violations.

A proper plumbing layout should also include key components such as backwater valves and cleanouts installed after the grease interceptor to ensure accessibility, safety, and long-term maintenance.

At JAM Plumbing PDX, we take the time to evaluate these conditions before installation begins, making sure the system is designed correctly from the start and built to pass inspection.

Get your estimate

Restaurant Plumbing Services in Portland, OR

Commercial plumbing for restaurants and bars is significantly different from residential plumbing and requires a higher level of planning, code compliance, and system design.

Unlike residential projects, commercial kitchens must meet strict city and health department requirements to obtain permits and pass inspections. These systems are designed to handle heavy daily use, grease waste, and high water demand, which requires proper sizing, layout, and installation from the start.

Restaurant and bar plumbing typically includes specialized components such as grease traps, floor sinks, floor drains, mop sinks, bar sinks, and commercial dishwashing systems. Each of these elements must be installed according to code, with proper venting, drainage, and accessibility for maintenance and inspection.

In many cases, plumbing plans must be submitted to the city before construction begins. While some projects include plans provided by an architect or engineer, there are situations where plumbing layouts need to be developed or adjusted to meet code requirements and pass inspection. We can assist in creating or modifying plumbing layouts to ensure the project is approved and completed correctly.

At JAM Plumbing PDX, we understand the specific requirements for restaurant and bar plumbing in Portland, OR. Our experience allows us to design and install systems that not only meet code but also perform efficiently in high-demand commercial environments.

Commercial Plumbing Projects – Real Work, Real Results

Repipe Specialists In Portland Before And After Project

Get an Estimate

Venting Systems That Protect Your Kitchen and Pass Inspection

Another critical detail that is often overlooked in restaurant plumbing is proper venting design. This is an area where many installations fail inspection if not done correctly.

In commercial kitchens, venting systems must be designed to prevent sewer gases from re-entering the building. Vent lines cannot be improperly tied into systems that may allow sewer gases from the main city line to travel back into the kitchen area.

All kitchen fixtures that discharge through a grease trap must be properly vented in accordance with code. These vent systems must remain independent and correctly routed to ensure that harmful gases do not backflow into the building.

Improper venting can result in strong odors, unsafe conditions, failed inspections, and costly corrections. This is why proper planning and separation of venting systems is just as important as the drainage layout itself.

At JAM Plumbing PDX, we ensure that all venting is installed correctly, safely, and in compliance with code to protect both the building and its occupants.

Get an Estimate

Grease Trap Installation

Commercial Kitchen Plumbing

Bar & Restaurant Plumbing Systems

Our Restaurant & Bar Plumbing Services

Grease Trap Installation

Proper installation to meet code and ensure correct drainage and inspection approval.

Floor Sinks & Drains

Designed for commercial kitchens with proper indirect waste and easy maintenance.

Commercial Kitchen Rough-In

Get an Estimate

Common Plumbing Issues in Restaurants and Bars

Many restaurant plumbing systems were installed years ago under older codes or different standards. While they may have passed inspection at the time, they don’t always meet current requirements or perform properly today.

Over time, issues can develop due to improper grease line separation, outdated layouts, or venting systems that were not designed for heavy commercial use. This can lead to slow drainage, recurring backups, and strong odors inside the building.

In many cases, these problems are not visible until the kitchen is fully operating. What once worked may no longer be efficient or compliant with current regulations.

Updating and correcting these systems is often necessary to improve performance, meet current code requirements, and create a safer, cleaner environment for staff and customers.

Get an Estimate

How We Approach Commercial Plumbing Projects

Every project starts with a real evaluation of the job site — not just the plans. We verify elevations, drainage paths, venting routes, and grease system requirements before installation begins.

Our focus is to prevent problems before they happen. This includes making sure grease lines are properly separated, venting systems are correctly installed, and all required components are in place for inspection.

When needed, we also assist in adjusting or creating plumbing layouts to meet city requirements and avoid delays during the permit and inspection process.

Our goal is simple: build a system that works properly, passes inspection, and doesn’t create problems down the line.

Get an Estimate

WE CAN SCHEDULE A FREE CONSULTATION TO ANSWER ANY QUESTIONS YOU MAY HAVE

Get an Estimate

Restaurant & Bar Plumbing Services in Portland, OR

Restaurant & Bar Plumbing Specialists in Portland

DO YOU NEED RESTAURANT PLUMBING SERVICES?

Need Plumbing Layouts for Permits?

Plumbing for Restaurants and Bars — Built to Pass Inspection

Restaurant Plumbing Services in Portland, OR

Commercial Plumbing Projects – Real Work, Real Results

Venting Systems That Protect Your Kitchen and Pass Inspection

Our Restaurant & Bar Plumbing Services

Common Plumbing Issues in Restaurants and Bars

How We Approach Commercial Plumbing Projects

WE CAN SCHEDULE A FREE CONSULTATION TO ANSWER ANY QUESTIONS YOU MAY HAVE

CONTACT INFO

Location

WITH MORE THAN 25 YEARS EXPERIENCE IN CONSTRUCTION

WE’RE HIRING